– 56 –
INTERFACE MANUAL
STE 85457
Copyright(C) 2008 by TOSHIBA MACHINE CO.,LTD.
ALL RIGHTS RESERVED.
EXTERNAL SELECT FILE
*** [ 00 - 0F ] *****
= "PROG00"
= "PROG01"
= "PROG02"
= "PROG03"
= "PROG04"
= "PROG05"
= "PROG06"
= "PROG07"
= "PROG08"
= "PROG09"
= "PROG0A"
= "PROG0B"
= "PROG0C"
= "PROG0D"
= "PROG0E"
= "PROG0F"
The initial setting is as shown above. Specify a file name you registered
beforehand for the underlined of "PROG**".
Example:
[U08] EXTSELECT file
= "AAA"
= "BBB"
= "CCC"
= "DDD"
Specify the above program names in advance. Then specify zero (0) for both bits 1
and 2 of DIN command, which are set under [U07] (assume that [U07] = 1 2) and
input the STROBE signal. Program "AAA" is automatically selected now. (If the
following steps are taken without registering the program names, a "Compile Error"
occurs.)
After the above parameter has been changed, save the data, turn the power off and
on again. Otherwise, the parameter will not be operative.
Summary of Contents for TSL3000E
Page 128: ... z INTERFACE MANUAL STE 85457 ...
