Toshiba TLP411E, Technical Training Manual

Page: 36 / 84

5-12
14. APPLICABLE SIGNAL
Quite a signals are used as the applicable signals in the
preset mode (standard value) as shown in table 5-10. For
the signals not fit to the preset modes, a user mode is pro-
vided.
In the preset modes, the applicable signals are based on the
VESA standard, so the sample frequency (CLOCK adjust-
ment in the panel menu) is not used, but the adjustment is
allowed only in the user mode.
In the user mode, the signal line number is detected to al-
low the separate adjustment in the VGA system (basically
effective for line number of 480/400/350 lines) and SVGA
system (basically effective for line number of 600 lines).
In the user mode of SVGA system, the input signal is ap-
plicable to the plain display mode only in the XGA system
(basically effective for line number of 768 lines) . That is,
the signal is displayed.
Table 5-8 Applicable signal
Signal Resolution All Frequency Sync Operation
Mode
Content H V H V H V
Clock
H/V
Check
Remarks
NTSC NTSC 664 484 800 525 15.730 59.940 12.590 N/N O Video input
PAL PAL 756 574 800 625 15.630 50.000 12.500 N/N O Video input
V60 VGA 60 Hz 640 480 800 525 31.470 59.940 25.175 N/N O
V70 VGA 70 Hz 720 350 900 450 31.470 70.020 28.322 P/N
∆
V70 VGA 70 Hz 720 400 900 450 31.470 70.020 28.322 N/P
∆
V70 VGA 70 Hz 640 350 800 450 31.470 70.020 28.322 P/N O
V70 VGA 70 Hz 640 400 800 450 31.470 70.020 28.322 N/P O
V72 VGA 72 Hz 640 480 832 520 37.860 72.810 31.500 N/N O
V75 VGA 75 Hz 640 480 840 500 37.500 75.000 31.500 N/N O
V85 VGA 85 Hz 640 350 832 445 37.861 85.080 31.500 P/N O
V85 VGA 85 Hz 640 400 832 445 37.861 85.080 31.500 N/P O
V85 VGA 85 Hz 720 400 936 446 37.927 85.039 35.500 N/P
∆
V85 VGA 85 Hz 640 480 832 509 43.269 85.008 36.000 N/N O
M13 MAC-13" 640 480 864 525 35.000 66.670 30.240 N/N O
24K PC98 640 400 848 444 24.830 56.420 21.053 N/N O
S56 SVGA 56 Hz 800 600 1024 625 35.160 56.250 36.000 N/N O
S60 SVGA 60 Hz 800 600 1056 628 37.880 60.320 40.000 N/N O
S72 SVGA 72 Hz 800 600 1040 666 48.080 72.190 50.000 N/N O
S75 SVGA 75 Hz 800 600 1056 625 46.880 75.000 49.500 N/N O
S85 SVGA 85 Hz 800 600 1048 631 53.674 85.061 56.250 N/N O
M16 MAC-16" 832 624 1152 667 49.720 74.550 57.283 N/N O
USHI XGA 60 Hz 1024 768 1344 806 48.363 60.004 65.000 N/N
w
Plain display
USHI XGA 70 Hz 1024 768 1328 806 54.476 70.069 75.000 N/N
w
Plain display
USHI XGA 75 Hz 1024 768 1312 800 60.023 75.029 78.750 N/N X Plain display
USHI XGA 85 Hz 1024 768 1376 808 68.677 84.997 94.500 N/N X Plain display
• In the sync column of table 5-8, P shows the positive
polarity and N shows the negative polarity.
• In the operation column, O shows a standard mode,
D
shows pull-in mode,
¨
shows plain display mode and
X shows the signal is out of correspondence.