Toshiba T-Series T3300sl Maintenance Manual Download Page 92

Page: 92 / 192

3-46

FORMAT option

(1)

Selecting FORMAT displays the following message.

DIAGNOSTICS - FLOPPY DISK FORMAT : Vx.xx

Drive number select (1=A:,2=B:) ?

(2)

Select a drive number and press

Enter

to display the following message.

Type select (0:2DD-2DD,1:2D1-2D,2:2D-2HD,3:2HD-2HD) ?

(3)

Select a media/drive type number and press

Enter

. A message similar to the one

below will be displayed.

Warning : Disk data will be destroyed.

Insert work disk into drive x:

Press any key when ready.

(4)

Remove the Diagnostic Disk from the FDD, insert the work disk, and press any key.
The following message will be displayed when the FDD format is executed.

[ FDD TYPE ] : TRACK = xxx

[ FDD TYPE ] : HEAD = x

[ FDD TYPE ] : SECTOR = xx

Format start

[[track, head = xxx x]]

After the floppy disk is formatted, the following message will appear:

Format complete

Another format (1:Yes/2:No) ?

(5)

If you select Yes, the display will repeat the message in step (3) above. If you select
No, the display returns to the DIAGNOSTICS MENU.

COPY option

(1)

When COPY is selected, the following message appears.

FLOPPY DISK FORMAT & COPY : Vx.xx.

Type select (0:2DD-2DD,1:2D-2D,2:2D -2HD,3:2HD-2HD) ?

(2)

Select a media/drive type number. A message similar to the one below will be
displayed.

Insert source disk into drive A:

Press any key when ready.

Summary of Contents for T-Series T3300sl

































































































































































































Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands

Toshiba T-Series T3300sl, Maintenance Manual

Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands