2-18
Table 2-2 Printer port LED error codes (continued)
Printer Port
LED Indication
Error
Codes
Test Item
Contents of the test
A
B
26h
HDD initialization
Checks if the HDD is connector or not.
Initializes the HDC.
27h
FDD initialization
Checks if the external FDD is connected or not.
Initializes the FDC.
28h
Printer investigation
Checks the printer port.
29h
SIO initialization
Checks if the SIO functions properly or not.
30h
Timer initialization
Checks the RTC's year, month, and day.
Timer count set for INT 08h.
Checks if the timer interruption functions properly or not.
31h
NDP initialization
Checks if the NDP is installed or not.
32h
Extended ROM initialization
Checks if the extended ROM is installed or not.
Initializes the extended ROM.
33h
SETUP startup check
Checks if the SETUP starts up properly or not.
34h
Boot/load
Boots and loads the operating system.
NOTE: If an error condition is detected by the IRT test, the printer port LED displays an error
code after the IRT test finishes. For example, when the printer port LED displays 16h and
halts, the IRT test has already completed the KBC test. In this instance, the IRT indicates an
error with the system memory test. Error codes marked with an asterisk (*) indicate that the
IRT test aborts after the printer port LED outputs the error code.
Check 1
If the following error codes are displayed, replace the system board with a new one.
FFh, 00h, 01h, 02h, 05h, 06h, 07h, 0Ah, 0Dh, 15h, 16h, 18h,
1Fh, 22h, 25h, 30h, 40h, 41h, 42h, 4Ah, 70h, 80h, 90h, A0h,
A6h
Check 2
If error code 54h is displayed, go to the Keyboard Troubleshooting Procedures in Section
2.7.
Check 3
If error code 5Ah is displayed, make sure the mouse cable is connected to the system
board. If it is, replace the system board with a new one.
Check 4
If error code 60h is displayed, go to the HDD Troubleshooting Procedures in Section 2.6.
Check 5
If error code 65h is displayed, go to the FDD Troubleshooting Procedures in Section 2.5.
= On
= Off
Summary of Contents for T-Series T3300sl
