Toshiba T-Series T3300sl Maintenance Manual Download Page 90

Page: 90 / 192

3-44

3.19 Running Test

3.19.1 Function Description

This function automatically executes the following tests in sequence:

System Test (Subtest number 01)

Memory Test (Subtest number 01, 02, 03, 04, 06, 07)

Display Test (Subtest number 01 to 08)

Floppy Disk Drive Test (Subtest number 02)

Printer Test (Subtest number 03)

ASYNC Test (Subtest number 01)

Hard Disk Test (Subtest number 01, 05)

Real Timer Test (Subtest number 02)

The system automatically detects the number of floppy disk drives connected to the T3300SL for the
Floppy Disk Drive Test.

3.19.2 Operations

CAUTION: Do not forget to load a work disk in the FDD. If a work disk is not loaded, an
error will be generated during the FDD testing.

Remove the Diagnostic Disk from the floppy disk drive and insert the work disk.

Select the Running Test by typing 6 from the DIAGNOSTICS MENU and pressing

Enter

The following message will be displayed.

Printer wrap around test (Y/N) ?

Selecting Yes executes the printer wraparound test. A printer wraparound connector must be
connected to the

PRT/FDD

port on the back of the T3300SL to properly execute this test.

Type Y or N and press

Enter

. The following message will appear.

Serial #A wrap around test (Y/N) ?

Selecting Yes executes the ASYNC wraparound test. An RS-232-C wraparound connector
must be connected to the

SERIAL A

port on the back of the T3300SL to properly execute

this test.

Type Y or N and press

Enter

to start the test.

This program is executed continuously. To terminate the program, press

Ctrl + Break

Summary of Contents for T-Series T3300sl

































































































































































































Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands

Toshiba T-Series T3300sl, Maintenance Manual

Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands