3-55
LCD GRAY SCALE LEVEL
This option lets you switch between 16 and 32 levels of gray and uses normal or reverse
video. This option also appears in the Pop-up Window. The options are:
Normal 16 levels
Displays black text on a white background with 16 levels
of gray.
Reverse 16 levels
Displays white text on a black background with 16 levels
of gray.
Normal 32 levels
Displays black text on a white background with 32 levels
of gray. This is the default setting.
Reverse 32 levels
Displays white text on a black background with 32 levels
of gray.
HARD DISK
This option displays the size and type of hard disk installed in the T3300SL.
POWER ON PASSWORD
This option allows you to enable or disable the password required for the T3300SL to power on and
allow access to the C prompt.
If the Power On Password option has not been enabled, the SETUP function displays the following
message:
Not Registered
HOW TO ENABLE THE PASSWORD
To enable the Power On Password option, follow these steps.
NOTE: When typing the password, you can use either capital letters or small letters.
1.
Highlight the
Not Registered
setting in the Power On Password option.
2.
Press the
Spacebar
or
Backspace
key to display the following prompt.
Password =
Summary of Contents for T-Series T3300sl
