Toshiba T-Series T3300sl Maintenance Manual Download Page 142

Page: 142 / 192

4-32

screws (Figure 4-22).

4.9

Power Supply Board

4.9.1

Removing the Power Supply Board

Turn off the power to the T3300SL. Disconnect the AC adapter and all external cables
connected to the computer.

Remove the FDD and system board as instructed in Section 4.8.

NOTE: It is not necessary to remove the LED board in order to remove the power supply
board. Simply disconnect the LED board from PJ11 on the system board before removing
the system board.

Lift the power supply board out of the T3300SL (Figure 4-30).

Figure 4-30 Removing the power supply board

4.9.2

Installing the Power Supply Board

Place the power supply board in the T3300SL (Figure 4-30).

Align the board with the guide pin on the keyboard base (Figure 4-30).

Guide pin

Power supply board

Summary of Contents for T-Series T3300sl

































































































































































































Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands

Toshiba T-Series T3300sl, Maintenance Manual

Search results

Summary of Contents for T-Series T3300sl

Reviews:

Related manuals for T-Series T3300sl

Brands by name

Popular brands