Toshiba Stratagy Flash, Installation Manual

Page: 32 / 56

Installation
Step 12: Program the Mailboxes
20
Stratagy Flash Installation Guide 02/02
Step 12: Program the Mailboxes
➤
Program the User mailboxes for the customer’s application. See Chapter 6 – Users Menu,
Chapter 7 – Auto (Scheduling) Menu and Chapter 8 – Notify Menu in the Stratagy R3 I&M
Manual for complete details on using the screens.
Step 13: Program Applications
Note See Chapter 10 – Token Programming in the Stratagy R3 I&M Manual for complete details
on all the Stratagy tokens.
%K Token
Stratagy Flash recognizes the Calling Party Identification when sent from the Strata DK telephone
system through a SMDI integration.
Once a value is determined to be a Calling Party ID number, it is stored in a buffer ( %K token) for
the duration of the call. A User ID programmed with a token application that reads the new %K
value performs the programmed function (e.g., a database look up for call routing based on the
number calling). The value stored in the buffer (
%K ) is cleared when the call is completed.
SMDI Calling Party Identification
The Strata DK telephone system only provides the Stratagy Flash with incoming Calling Party ID
via SMDI integration. Data messages or packets are sent into the system to provide information
concerning the type of call and the calling party ID.
See Chapter 11 – SMDI Serial Integration in the Stratagy R3 I&M Manual for detailed
information.
New User Tutorial Introductory Recording
The New User Tutorial feature plays a introduction prompt prior to beginning the tutorial. Stratagy
comes with a default recording that is saved in the system as a voice file called
‘TUTORIAL.VOX’. This file can be found in the STRATAGY directory on the hard drive.
This prompt can be rerecorded to personalize the introductory recording. For example the
recording could say,
“The following is a new user tutorial that will walk you through the set up of your mailbox...
Please see Jane Doe your Installation Coordinator for XYZ Telecom if you have any questions.”
The default recording can be rerecorded by the use of Token Programming.
Rerecord Tutorial
1. Create a new User ID in the system.
2. In the Extension field enter:
@KR(C:\\STRATAGY\\TUTORIAL.VOX)G(991)
@ Stop normal processing
KR Record a voice file.
( ) file name and location within parentheses
G(991) Go to User ID 991