Toshiba Stratagy Flash Installation Manual Download Page 8 | Manualshive

Page: 8 / 56

background image

4

7HOHSKRQH6\VWHP&RQILJXUDWLRQ

The Stratagy Flash Voice Processing system works with all Strata® DK424/DK280,
DK40i/DK40/DK16e/DK16, DK14/DK8 and DK24/DK56/DK96 (Release 4) systems.

❐

Make sure there are enough single line (analog) station ports on the Strata DK to support the number of
Stratagy Flash ports required.

❐

Strata DK needs to recognize the Stratagy Flash’s DTMF signaling. Make sure an RRCS is installed on
the DK424i/DK424/DK280 RCTU, a K5RCU, K5RCU2 or K4RCU3 in the DK40i/DK40/DK16e/
DK16, or CRCU in the DK24/DK56/DK96.

❐

Run Program 03 and assign these code(s) where the DTMF receiver is installed:

Note

When DK14/DK8 is powered on, Program 03 automatically assigns the correct code for the
QRCU.

5

60',&RQVLGHUDWLRQV

We recommend Simplified Message Desk Interface (SMDI) integration for optimum
performance of both the Stratagy and Strata systems.

❐

The Strata DK telephone system must be equipped with a PIOU/PIOUS, RSSU, or RSIU/RSIS card for
SMDI integration.

❐

Strata DK424i/DK424/DK280

:

SMDI is available on all processors. The A processor must have

Release 3.1 software or higher.

❐

Set code 43 in Program 03 for PIOU/PIOUS/RSSU or code 49 for RSIU/RSIS.

❐

A serial cable must be installed between the PIOU/PIOUS/RSSU/RSIU card and the Stratagy Flash.
Toshiba’s PPTC-9 (with six-conductor line cord) is recommended.

❐

Refer to the Stratagy Flash Installation Guide and the Stratagy R3 I&M Manual for complete
instructions on configuring Stratagy Voice Processing systems for SMDI integration.

6

-XVWD)HZ0RUH7KLQJV

❐

Be sure to change the security code of the Shutdown Mailbox User ID 983. See the Stratagy Flash
Installation Guide for details.

❐

When using an internal modem in the Stratagy Admin PC, remember that Stratagy Admin does not
work with the COM 3 or 4 port.

❐

Toshiba suggests that you do not write over the Stratagy Admin directory when installing a newer
version of Stratagy Admin. Always retain previous versions of the Stratagy Admin software for use
with other Stratagy Flash systems.

❐

Make sure you have your Stratagy Flash Installation Guide, Stratagy R3 I&M Manual and Strata DK
I&M and Programming Manuals on hand for the installation. Be sure to read the Stratagy Flash
Installation Guide before installing the system.

❐

Remember to back up your database after installation.

❐

Remember to effectively update the Automatic System Recovery feature, you must shut down and
restart the Stratagy Flash after making important programming changes.

If you have read and completed this checklist, installation will be a breeze!

OK, let’s get started!

DK424i/DK424/DK280

DK40i/DK40/DK16e/DK16

DK24/DK56/DK96

Code 92, 93, or 94 for slot 00

Code 92 for slot 00

Code 92 or 93

4011027

«
...
6
7
8
9
10
...
»

Summary of Contents for Stratagy Flash

























































Reviews:

No comments

Related manuals for Stratagy Flash

Netlink FRX8000

Brand: Cabletron Systems Pages: 94

MMAC-Plus 9E423-24

Brand: Cabletron Systems Pages: 10

MMAC-Plus 9A128-01

Brand: Cabletron Systems Pages: 22

Spectrum EMM-E6

Brand: Cabletron Systems Pages: 2

Brand: Cabletron Systems Pages: 54

Cabletron BRIM-F6

Brand: Cabletron Systems Pages: 43

Netlink FRX4000

Brand: Cabletron Systems Pages: 60

Brand: Cabletron Systems Pages: 8

Brand: Cabletron Systems Pages: 4

Brand: Avolites Pages: 24

FieldPoint cFP-RTD-122

Brand: National Instruments Pages: 15

StorageWorks AIT 35GB AutoLoader

Brand: Compaq Pages: 4

Brand: Grizzly Pages: 9

Brand: Grundig Pages: 24

iTRON B 70.2040

Brand: JUMO Pages: 41

Brand: Renesas Pages: 76

E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core Processor

Brand: Intel Pages: 112

Brand: ASROCK Pages: 173

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands