Toshiba Stratagy Flash, Installation Manual

Page: 15 / 56

The Grand Tour
Software
Stratagy Flash Installation Guide 02/02
3
On/Off
The Stratagy Flash is not equipped with an On/Off switch.
➤
To turn the Stratagy Flash On/Off
1. Use Stratagy Admin or Telephone Admin to shut down the Stratagy application.
2. Attach or detach the Stratagy Flash power supply using a properly grounded electrical outlet.
The Power Light goes On/Off accordingly.
➤
To reset the Stratagy Flash
1. Use Stratagy Admin or Telephone Admin to shut down the Stratagy application.
2. Unplug the Stratagy Flash’s power cord from the wall, wait a few seconds and then plug it back
in.
Status Light
The status light indicates the state of the Stratagy application:
•
On = Stratagy is running.
•
Off = Stratagy is shutdown.
Voice Port Status Lights
Each port has a status light labelled I~IIII on the front of the Stratagy Flash unit (see Figure 1 ) that
indicates the hookswitch and ring states of the port. The lights are On/Off based on the following:
When Stratagy is shutdown, all connected port status lights are On.
Software
The Stratagy Flash requires Stratagy Admin software, installed on a separate IBM-compatible
Stratagy Admin PC, for local or remote administration and maintenance. Some basic
administrative functions (e.g., adding User IDs, resetting passwords) can be performed by the
System Administrator using a touchtone telephone (see the System Administrator Guide on the
Stratagy Library CD-ROM
for details).
The Stratagy Admin screens are identical to the standard Stratagy screens with the exception of the
Main Menu.
Signal (Loop Current On)
Voice Port
Status Lights
Hookswitch On Off
On-HOOK
X
1
1.
When a ring signal is present, the voice port status light flickers
rapidly during the audible part of the ringing.
Off-HOOK X