Toshiba SL-5300 Series Owner'S Manual Download Page 128

Page: 128 / 224

15. SET UP MODE

EO1-31009

15.4 Memory Card Operation

15-33

(3) Irregular Pieces

Format pattern

Pieces pattern

W1234 W12345

1 PCS.

0001

00001

12 PCS.

0012

00012

3. Others condition regarding Barcode Specification.

It will be printed only code data (C1 –C6) if error occurred.

(1) C/D (13 digits)

C/D should set to the position of end digit of 13 digits if C/D is needed.

(2)

PC/D

It is accepted that PC/D is free position.

(3)

Weight

W1 - W5 are used for “Weigh mode”, “Fix mode” and “By-count mode”.

In case of By-count mode, W1 – W5 will use for Pieces data.

15.4 Memory Card Operation

You can format a memory card, load or save the data to a memory card or copy information from one
memory card to another with this menu.

The following screen will appear when the [Memory card] key of the Set up menu is touched.

Procedure

Item Procedure

Save

1. Select the SLOT 0 or SLOT 1.
2. Touch [SAVE] key.
3. The Folder/File Selection screen will appear. See Section 15.4.1.

Load

1. Select the SLOT 0 or SLOT 1.
2. Touch the [LOAD] key.
3. The Folder/File Selection screen will appear. See Section 15.4.1.

SAVE key

Clear File in Scale
Memory key

LOAD key

FORMAT key

COPY key

SLOT 0 and SLOT 1 area

Summary of Contents for SL-5300 Series

































































































































































































































Search results

Summary of Contents for SL-5300 Series

Reviews:

Related manuals for SL-5300 Series

Brands by name

Popular brands

Toshiba SL-5300 Series, Owner'S Manual

Search results

Summary of Contents for SL-5300 Series

Reviews:

Related manuals for SL-5300 Series

Brands by name

Popular brands