Toshiba SL-5300 Series Owner'S Manual Download Page 200

Page: 200 / 224

19. REPORT/RESET MODE

EO1-31009

19.1 Label Mode Total Memory Report/Reset

19- 7

Procedure (continued)

Item Procedure

VENDOR TOTAL

When using the Report No.
1. Input the Report No. (max. 4 digits) with the numeric keys, and then touch

the Report No. area.

NOTE: For the Report No., refer to the Table in Section 14.11.

2. (When specifying the code area)

Input the Start Code (max. 2 digits) and touch the START CODE area.
Then input the End Code (max. 2 digits) and touch the END CODE area.

3. To display the report on the screen, touch the [ON SCREEN] key.

To print the report on the journal paper, touch the [PRINT] key.

When selecting the total type on the screen
1. Touch the [VENDOR TOTAL] key.
2. Memory type selection

Touch the [NORMAL], [REWRAP], or [MARKDOWN] key.

3. Analysis type selection

Touch the [CODE ORDER], [CUSTOM ORDER], [ITEM ORDER], or
[AMOUNT ORDER] key.

4. Data type selection

Touch the [ALL], [ZERO SKIP], [ZERO], [BEST] or [WORST] key.

NOTE: As an example, to specify the output area “Best 10” or “Worst 10”,

enter 10 with the numeric keys and then touch the [BEST] or
[WORST] key, respectively.

5. (When specifying the code area)

Input the Start Code (max. 2 digits) and touch the START CODE area.
Then input the End Code (max. 2 digits) and touch the END CODE area.

6. To display the report on the screen, touch the [ON SCREEN] key.

To print the report on the journal paper, touch the [PRINT] key.

Summary of Contents for SL-5300 Series

































































































































































































































Search results

Summary of Contents for SL-5300 Series

Reviews:

Related manuals for SL-5300 Series

Brands by name

Popular brands

Toshiba SL-5300 Series, Owner'S Manual

Search results

Summary of Contents for SL-5300 Series

Reviews:

Related manuals for SL-5300 Series

Brands by name

Popular brands