15. SET UP MODE
EO1-31009
15.2 Label Format Setting
15- 7
Item Procedure
X, Y
1. Input a value.
2. Touch the X or Y area.
NOTES:
1. Programmable value range depends on the format No. or Item. (Unit:
0.125 mm)
2. The position indicated by X and Y is the lower left corner of a print item.
Format Image Screen
When the Item area of the Free Format Setting screen is touched, the following screen will appear.
You can change the print items’ positions while checking the print image.
No...........................Selected label format No.
Item ........................Selected print item
Type .......................Selected print item’s format type
Exp. ........................Explanation of the format type
x (mm) ....................X (horizontal) position of the print item’s lower left corner
y (mm) ....................Y (vertical) position of the print item’s lower left corner
Line ct.....................The number of Ingredient lines
angle.......................Rotation
Logo size (dot)........Size of logo print
If the logo data is larger than specified size, the part outside the specified size will
not be printed.
Format No.
Item Name
The name of adjusting item
is displayed.
Type
Explanation area
Line ct.
Angle
Logo size
Format image area
The frame of adjusting
item is colored blue at
home position.
Address
When the item except
address is moved to
this area, then item is
printed on only 2nd.
Label in case 2 pieces
print.
ROTATION key
LAST ITEM key
NEXT ITEM key
FORMAT PRINT key
Cursor key
Cursor key
Summary of Contents for SL-5300 Series
Page 1: ...TEC Electronic Computing Scale SL 5300 SERIES Owner s Manual ...
Page 222: ......
Page 223: ......
