14. PROGRAMMING MODE
EO1-31009
14.2 PLU Data Setting
14- 9
Item Procedure
FSP (Frequent Shoppers) To set the sale promotion schedule No.:
1. Input a schedule No. (1 – 99)*
2. Touch the FSP schedule area.
Or,
1. Touch the FSP schedule area.
2. The schedule list will appear.
3. Touch the desired schedule from the list.
For details of the schedule, refer to Section 14.17.
To set the discount amount:
1. Input a numeric data (max. 999.99).
2. Touch the Discount area (left side).
To set the discount rate:
1. Input a numeric data (max. 99.9%).
2. Touch the Discount area (right side).
NOTES:
1. With the initial settings, the FSP function is not available. When this
function is required, contact the nearest TOSHIBA TEC service
representative or sales agent.
2. For the BONUS logo and FSP logo settings, refer to the NOTES for the
LOGO setting on the following page. However, the logo print area is limited
to the following size:
3. The Bonus logo’s print area is shared by LOGO 3. Usually LOGO 3 takes
precedence over the Bonus logo except during the FSP schedule time
range.
4. The FSP logo’s print area is shared by Coupon logo. Usually Coupon
logo takes precedence over the FSP logo except during the FSP schedule
time range.
Shortened Commodity
Name
1. Touch the Shortened commodity name area.
2. Input a short commodity name (max. 24 characters) on the Edit
screen.
NOTE: When the commodity name is shortened by using the [Comm.
Short] key, the first 24 characters of the commodity name are
automatically displayed in the Shortened commodity name area.
118 dots
64 dots
256 dots
104 dots
*: To clear the entered number, input “0”.
Summary of Contents for SL-5300 Series
Page 1: ...TEC Electronic Computing Scale SL 5300 SERIES Owner s Manual ...
Page 222: ......
Page 223: ......
