Toshiba Satellite X30-D Series User Manual Download | Manualshive

Page: 5 / 162

background image

The Bluetooth

®

word mark is a registered trademark owned by Bluetooth

SIG, Inc.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are registered trademarks or trademarks of HDMI Licensing
LLC in the United States and other countries.
DTS, the Symbol, & DTS and the Symbol together are registered
trademarks and DTS Studio Sound is a trademark of DTS, Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
All other company names, product names, and service names mentioned
herein may be trademarks of their respective companies.

Regulatory Information

The regulatory information herein might vary. Check the ID information on
the bottom of the device or box for specific information applicable to the
model you purchased.

FCC information

This device complies with FCC RF exposure requirements

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits can be attached to
this equipment. Operation with non-compliant peripherals or peripherals not
recommended by TOSHIBA is likely to result in interference to radio and
TV reception. Shielded cables must be used between the external devices
and the computer’s Universal Serial Bus (USB 3.0) port, Thunderbolt™ 3/

User's Manual

1-2

«
...
3
4
5
6
7
...
»

Summary of Contents for Satellite X30-D Series



































































































































































Reviews:

No comments

Related manuals for Satellite X30-D Series

Toughbook CF-Y5LWEZZBM

Brand: Panasonic Pages: 36

Brand: IBM Pages: 503

Brand: XPG Pages: 30

ThinkPad T40 series

Brand: IBM Pages: 188

Brand: NEC Pages: 27

Universal Car/Air Adapter

Brand: Kensington Pages: 7

Brand: Acer Pages: 234

Inspiron 15-3541

Brand: Dell Pages: 97

Inspiron 15 7000 Series

Brand: Dell Pages: 29

Brand: HP Pages: 43

4320t - Mobile Thin Client

Brand: HP Pages: 92

2710p - Compaq Business Notebook

Brand: HP Pages: 58

Brand: HP Pages: 117

2730p - EliteBook - Core 2 Duo 1.86 GHz

Brand: HP Pages: 126

6530b - Compaq Business Notebook

Brand: HP Pages: 40

2730p - EliteBook - Core 2 Duo 1.86 GHz

Brand: HP Pages: 46

Brand: HP Pages: 55

Brand: HP Pages: 105

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands