Toshiba Satellite X30-D Series User Manual Download

Page: 40 / 162

Chapter 3

The Grand Tour

This chapter identifies the various components of the computer. It is
recommended that you become familiar with each before you operate the
computer.

Legal Footnote (Non-applicable Icons)
For more information regarding Non-applicable Icons, refer to the

Legal

Footnotes

section.

Handle your computer carefully to avoid scratching or damaging the
surface.

Front with the display closed

The following figure shows the front of the computer with the display panel
in the closed position.

Figure 3-1 Front of the computer with display panel closed

1. Stereo speakers

3. Power indicator

2. DC IN/Battery indicator

Stereo speakers

The speakers emit sound generated by your
software as well as audio alarms, such as low
battery condition, generated by the system.

DC IN/Battery
indicator

The

DC IN/Battery indicator

shows the

condition of the DC IN and the battery charge
status. White indicates that the battery is fully
charged while the power is being correctly
supplied from the AC power adaptor.
Refer to the

Power Condition Descriptions

section for more information on this feature.

User's Manual

3-1

Summary of Contents for Satellite X30-D Series



































































































































































Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands

Toshiba Satellite X30-D Series, User Manual

Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands