Toshiba Satellite X30-D Series User Manual Download

Page: 27 / 162

Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug)

Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug)

Either a 2-pin or 3-pin adaptor/cord is included with the computer
depending on the model.

Plug the power cord into a live wall outlet.

Connect the DC output plug of the AC adaptor to one of the
Thunderbolt™ 3/USB Type-C™ ports on your computer. The

DC IN/

Battery

indicator glows.

You can also establish connection through the USB Type-C™ adapter
(provided with some models). Refer to the

USB Type-C™ Adapters

section for more information.

Figure 2-3 Connecting the DC output plug to the computer

1. Thunderbolt™ 3/USB Type-C™
port

2. DC output plug

Opening the display

The display panel can be opened to a wide range of angles for optimal
viewing.
To open the display panel, slowly lift it with one hand holding the center of
the display panel (as shown in the following figure) and the other hand

User's Manual

2-4

Summary of Contents for Satellite X30-D Series



































































































































































Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands

Toshiba Satellite X30-D Series, User Manual

Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands