Toshiba Satellite X30-D Series User Manual Download

Page: 145 / 162

Communication

the AP or the feature will not function. Please contact the person
responsible for the AP for information on security for wireless

connections.

Connecting your modem

❖

Connect the built-in modem only to ordinary analog phone lines.

❖

Never connect the built-in modem to a digital line (ISDN).

❖

Never connect the built-in modem to the digital connector on a public
telephone or to a digital private branch exchange (PBX).

❖

Never connect the built-in modem to a key telephone system for residences
or offices.
Connection to any communication line other than an analog phone line

could cause a product system failure.

Summary of Contents for Satellite X30-D Series



































































































































































Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands

Toshiba Satellite X30-D Series, User Manual

Search results

Summary of Contents for Satellite X30-D Series

Reviews:

Related manuals for Satellite X30-D Series

Brands by name

Popular brands