Toshiba Satellite L30 Series User Manual Download

Page: 96 / 178

5-6

User’s Manual

The Keyboard

Windows

special keys

The keyboard provides two keys that have special functions in Windows

Windows

logo key activates the

start

menu and the other, the application

key, has the same function as the secondary mouse button.

This key activates the Windows

start

menu.

This key has the same function as the secondary mouse button.

Keypad overlay

Your computer's keyboard does not have an independent numeric keypad,

but its numeric keypad overlay functions like one.
The keys in the centre of the keyboard with gray letters make up the

numeric keypad overlay. The overlay provides the same functions as the

numeric keypad on the 101/102-key enhanced keyboard described

previously.

Turning on the overlays

The numeric keypad overlay can be used for numeric data input.

Numeric mode

To turn on the Numeric mode, press

Fn + F11

. Now try numeric data entry

using the keys in the following figure. Press

Fn + F11

again to turn off the

overlay.

The numeric keypad overlay

Summary of Contents for Satellite L30 Series



















































































































































































Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands

Toshiba Satellite L30 Series, User Manual

Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands