manualshive.com logo in svg

Toshiba Satellite L30 Series, User Manual, Page: 72 / 178

Share
Download
Toshiba Satellite L30 Series User Manual Download Page 72

3-14

User’s Manual

Getting Started

Restoring the preinstalled software from Recovery 

Media

If the preinstalled files are damaged, use the Recovery Media you created, 

the Product Recovery Media, or HDD recovery to restore them. To restore 

the operating system and all preinstalled software, follow the steps below.

1. Load the Recovery Media in the optional optical media drive and turn off 

the computer's power.

2. Hold down the 

F12

 key and turn on the power. When 

In Touch with 

Tomorrow TOSHIBA

 appears, release the 

F12

 key.

3. Use the upper or lower cursor key to select the CD/DVD in the display 

menu. For details, refer to the 

Boot Priority

 section in Chapter 7, 

HW 

Setup (Depends on the model you purchased)

.

4. A menu appears. Follow the on-screen instructions.

When you reinstall the Windows operating system, the hard disk will be 

reformatted and all data will be lost.

Summary of Contents for Satellite L30 Series



















































































































































































Reviews:

No comments