Toshiba Satellite L30 Series User Manual Download

Page: 16 / 178

xvi

User’s Manual

TOSHIBA Satellite L30 / Satellite Pro L30 Series

Panasonic

DVD-ROM & CD-R/RW Drive UJDA770T

■

The DVD-ROM & CD-R/RW drive employs a laser system. To ensure

proper use of this product, please read this instruction manual carefully

and retain for future reference. Should the unit ever require

maintenance, contact an authorized service location.

■

Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■

To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Summary of Contents for Satellite L30 Series



















































































































































































Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands

Toshiba Satellite L30 Series, User Manual

Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands