Toshiba Satellite L30 Series User Manual Download Page 89

Page: 89 / 178

User’s Manual

4-17

Operating Basics

Moving the computer

The computer is designed for rugged durability. However, a few simple

precautions taken when moving the computer will help ensure trouble-free

operation.

■

Make sure all disc activity has ended before moving the computer.

Check the disc indicator on the computer.

■

If a CD/DVD is in the drive, remove it. Also make sure the drawer is

securely closed.

■

Turn off the power to the computer.

■

Disconnect the AC adaptor and all peripherals before moving the

computer.

■

Close the display. Do not pick up the computer by its display panel.

■

Use the carrying case when transporting the computer.

■

When carrying your computer, be sure to hold it securely so that it does

not fall or hit anything.

■

Do not carry your computer by holding protruded portions.

Protruded portion

Summary of Contents for Satellite L30 Series



















































































































































































Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands

Toshiba Satellite L30 Series, User Manual

Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands