Toshiba Satellite L30 Series User Manual Download

Page: 54 / 178

2-6

User’s Manual

The Grand Tour

Front with the display open

This section shows the front of the computer with the display open. Refer to

the appropriate illustration for details. To open the display, slide the display

latch on the front of the display and lift up. Position the display at a

comfortable viewing angle.

The front of the computer with the display open

Hard Disk Cover

This cover protects the hard disk.

Battery Release

Lock (1)

Slide this lock to prepare the battery pack for

removal.

Battery Pack

The battery pack powers the computer when the

AC adaptor is not connected. For detailed

information on the battery pack, refer to

Chapter 6,

Power and Power-Up Modes

Battery Release

Latch (2)

Slide and hold this latch to release the battery

pack for removal. For detailed information on

removing the battery packs, refer to Chapter 6,

Power and Power-Up Modes

Cooling Vents

Cooling vents help prevent the CPU from

overheating.

Memory Module

Cover

This cover protects two memory module sockets --

one or two modules are preinstalled. Refer to the

Memory expansion

section in Chapter 8,

Optional

Devices

Wireless LAN Cover

This cover protects the Wireless LAN bay and, if

installed, the Wireless LAN card.

Display Screen

TouchPad

Power Button

TouchPad Control

Buttons

Summary of Contents for Satellite L30 Series



















































































































































































Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands

Toshiba Satellite L30 Series, User Manual

Search results

Summary of Contents for Satellite L30 Series

Reviews:

Related manuals for Satellite L30 Series

Brands by name

Popular brands