background image

4-24

User’s Manual

Operating Basics

Disconnecting LAN cable 

To disconnect the LAN cable, follow the steps below. 
1. Pinch the lever on the connector in the computer’s LAN jack and pull 

out the connector. 

2. Disconnect the cable from the LAN hub in the same manner. Check 

with your LAN administrator before disconnecting from the hub. 

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust 

and use care with liquids around the computer. 

Be careful not to spill liquids into the computer. If the computer does get 

wet, turn the power off immediately and let the computer dry completely 

before you turn it on again. 

Clean the computer using a slightly damp (with water) cloth. You can 

use glass cleaner on the display. Spray a small amount of cleaner on a 

soft, clean cloth and wipe the screen gently with the cloth. 

Remove the dust from the cooling vents on the Left side of the 

computer regularly with a vacuum cleaner. Refer to 

Left side

 section in 

Chapter 2

The Grand Tour

Moving the computer 

The computer is designed for rugged durability. However, a few simple 

precautions taken when moving the computer will help ensure trouble-free 

operation. 

Make sure all disk activity has ended before moving the computer. 

Check the Disk indicator on the computer. 

If a CD/DVD is in the drive, remove it. Also make sure the drawer is 

securely closed. 

Turn off the power to the computer. 

Disconnect the AC adaptor and all peripherals before moving the 

computer. 

Close the display. Do not pick up the computer by its display panel. 

Use the carrying case when transporting the computer. 

When carrying your computer, be sure to hold it securely so that it does 

not fall or hit anything. 

Do not carry your computer by holding protruded portions. 

Never spray cleaner directly onto the computer or let liquid run into any 

part of it. Never use harsh or caustic chemical products to clean the 

computer. 

Summary of Contents for Satellite L100-108



























































































































































































Reviews: