Toshiba Satellite L100-108 User Manual Download

Page: 132 / 186

8-10

User’s Manual

Optional Devices

A TV output feature is provided with some models. You can connect a

television set to the Video out jack on the computer. Follow the steps below.

If a television is connected to the computer, set the TV type in Display

Properties. Follow the steps below.

■

Intel

Graphics Media Accelerator Driver for Mobile.

■

TV single
1. Click

start

and click

Control Panel

, then

Appearance and

Themes

2. Double-click the

Display

icon to open the Display Properties

window.

3. Click the

Settings

tab and click the

Advanced

button.

4. Click

Intel

Graphics Media Accelerator Driver for Mobile

click

Graphics Properties

, click

Display

Devices

tab and the

Television

button.

5. Change the Settings which are suitable for your TV and suitable

according to the region you are.

6. Click

Apply

and/or

at Intel

Graphics Media Accelerator

Driver for Mobile Property.

■

LCD/TV Mode (Dual Display Clone / Extended Desktop)
1. Click

start

and click

Control Panel

, then

Appearance and

Themes

2. Double-click the

Display

icon to open the Display Properties

window.

3. Click the

Settings

tab and click the

Advanced

button.

4. Click

Intel

Graphics Media Accelerator Driver for Mobile

click

Graphics Properties

, click

Display Devices

tab and the

Intel

Dual Display Clone

button or

Extended Desktop

button.

5. Click

Device Settings

6. Change the Settings

which are suitable for your TV and suitable

according to the region you are and click

at Device Settings.

7. Click

Apply

and/or

.at Intel

Graphics Media Accelerator

Driver Property.

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands