Toshiba Satellite L100-108 User Manual Download

Page: 103 / 186

User’s Manual

5-7

The Keyboard

Temporarily using normal keyboard (overlay on)

While using the overlay, you can temporarily access the normal keyboard

without turning off the overlay:
1. Hold

and press any other key. All keys will operate as if the overlay

were off.

2. Type upper-case characters by holding

Fn + Shift

and pressing a

character key.

3. Release

to continue using the overlay.

Generating ASCII characters

Not all ASCII characters can be generated using normal keyboard

operation. But, you can generate these characters using their ASCII codes.
With the overlay on:
1. Hold down

Alt

2. Using the overlay keys, type the ASCII code.
3. Release

Alt

, and the ASCII character appears on the display screen.

With the overlay off:
1. Hold down

Alt + Fn

2. Using the overlay keys, type the ASCII code.
3. Release

Alt + Fn

, and the ASCII character appears on the display

screen.

Summary of Contents for Satellite L100-108



























































































































































































Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands

Toshiba Satellite L100-108, User Manual

Search results

Summary of Contents for Satellite L100-108

Reviews:

Related manuals for Satellite L100-108

Brands by name

Popular brands