Toshiba Satellite 1400 Series, Maintenance Manual

Page: 335 / 528

4.32 TFT FL (Model 14.1 Toshiba) 4 Replacement Procedures
Satellite 1400/2400 Series Maintenance Manual (960-364/365) 4-127
4
4.32 TFT FL (Model 14.1 Toshiba LTM14C433)
CAUTION : When you replace the fluorescent lamp, wear finger covers or gloves to
avoid contaminating or damaging the LCD panel. Be careful not to let dust or other
foreign matter into the module.
Removing the TFT FL (Model 14.1 Toshiba LTM14C433)
To remove the TFT FL (Model 14.1 Toshiba LTM14C433), follow the steps below and refer
to figures 4-101 to 4-106.
1. Carefully, turn the LCD module upside down on the flat surface of the table. To avoid
damaging the surface of the LCD module, lay it on a protective, dust-free sheet such
as a soft, clean cloth.
2. Remove one strip of insulation tape (3), two strips of insulation tape (2) and two
strips of insulation tape (1).
3. Lift up the X-PCB insulation sheet and Y-PCB insulation sheet . Be careful to lift
up only the part that covers the back of the LCD module. Hold down the frame as you
lift the insulation sheets. (Do not lift up the part of the sheet on the side of the frame.
X and Y-PCB insulation sheets will be reused.)
CAUTION : Do not damage the X-tab, Y-tab and FPC.