– 102 –
5. Refrigerant leak detection sensor
<Procedure>
1. Remove an electrical parts box cover in the procedure of
1. Intake grille and Electrical parts box
.
2. Remove connector from the refrigerant leak detection sensor placed at the inner left corner of the
electrical parts box.
3. Remove the sensor while pinching two nail tips on the spacer by needle-nose pliers.
* Push the refrigerant leak detection sensor until two nail tips on the spacer are locked with two holes
on both side of the sensor when installing it.
Remove
the
connector
Refr
i
gerant
l
eak
detect
i
on
sensor
N
a
il
t
i
p
Spacer
Refr
i
gerant
l
eak
detect
i
on
sensor
