– 77 –
8-1-4. Function Selection Setup
<Procedure>
Perform setting while the air conditioner stops.
Set up Central Control Address Number
1
Push the [
MENU] button to display the menu screen.
2
Push and hold the [
MENU] button and the [
] button at the same time to display
the “Field setting menu”.
→
Push and hold the buttons for more than 4 seconds.
3
Push the [
] / [
] button to select “7. DN setting” on the “Field setting menu”
screen, then push the “
S
et
Set” [
F2
F2] button.
→
The fan and louver of the indoor unit operate.
When the group control is used, the fan and louver of the selected indoor unit operate.
→
Move the cursor to select “Code(DN)” with the “
<
<” [
F1
F1] button, then set “Code(DN)”
with the [
] / [
] button.
→
Move the cursor to select “Data” with the “
>
>” [
F2
F2] button, then set “Data” with the
[
] / [
] button.
4
Push the [
MENU] button to set the other Code(DN) and Data. After “Continue?” is
displayed on the screen, push the “
No
No” [
F2
F2] button to finish the setting
operation. “ Setting” appears on the screen for a while, then the screen returns to the
“Field setting menu” screen.
