manualshive.com logo in svg

Toshiba Qosmio X300 Series, Maintenance Manual

Share
Download
Toshiba Qosmio X300 Series Maintenance Manual Download Page 157

Error! Style not defined. Error! Style not defined. 

4 Replacement Procedures 

Qosmio X300   Maintenance Manual 

4-13 

4.4 

Memory  

Removing the Optional Memory 

Remove the optional memory (module) according to the following procedures and Figure 4-4 
after checking that the computer is turned off in boot mode. 

CAUTION: Remove the optional memory after turning off the computer. If this is violated, 
the computer or memory can be damaged. 

1.

 

Turn the computer upside down. 

2.

 

Release the screw that secures the optional memory cover. 

3.

 

Remove the memory cover. 

CAUTION: Do not touch the connectors on the memory modules or in the computer. 
Contaminated connectors can cause memory access problems. 

 

Summary of Contents for Qosmio X300 Series
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands