manualshive.com logo in svg

Toshiba Portege R400 Series, Maintenance Manual, Page: 44 / 369

Share
Download
Toshiba Portege R400 Series Maintenance Manual Download Page 44

2  Troubleshooting Procedures  

 

2-6 

[CONFIDENTIAL] 

PORTEGE R400 Maintenance Manual (960-623) 

If the diagnostics program cannot detect an error, the problem may be intermittent.  The 
Running Test program should be executed several times to isolate the problem.  Check the 
Log Utilities function to confirm which diagnostic test detected an error, then perform the 
appropriate troubleshooting procedures as follows:  

1.

 

If an error is detected on the system test, memory test, display test, expansion test, 
real timer test, Sound/LAN/Modem test, Bluetooth test, perform the System Board 
Troubleshooting Procedures in Section 2.4. 

2.

 

If an error is detected on the floppy disk test, perform the USB FDD Troubleshooting 
Procedures in Section 2.5. 

3.

 

If an error is detected on the hard disk test, perform the HDD Troubleshooting 
Procedures in Section 2.6. 

4.

 

If an error is detected on the keyboard test (DIAGNOSTICS TEST) and pressed key 
display test (ONLY ONE TEST), perform the Keyboard/Touch pad Troubleshooting 
Procedures in Section 2.7. 

5.

 

If an error is detected on the display test, perform the Display Troubleshooting 
Procedures in Section 2.8. 

6.

 

If an error is detected on the LAN test, perform the LAN Troubleshooting Procedures 
in Section 2.9. 

7.

 

If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting 
Procedures in Section 2.10. 

8.

 

If an error is detected on the Wireless LAN test, perform the Wireless LAN 
Troubleshooting Procedures in Section 2.11. 

9.

 

If an error is detected on the 3G test, perform the 3G  Troubleshooting Procedures in 
Section 2.12. 

10.

 

If an error is detected on the Tablet Pen test, perform the Tablet Pen  Troubleshooting 
Procedures in Section 2.13. 

11.

 

If an error is detected on the Sound test, perform the Sound Troubleshooting 
Procedures in Section 2.14. 

12.

 

If a malfunction is detected on Fingerprint sensor, perform the Fingerprint sensor 
Troubleshooting Procedures in Section 2.15. 

Summary of Contents for Portege R400 Series


















































































































































































































































































































































































Reviews:

No comments