manualshive.com logo in svg

Toshiba Portege R400 Series, Maintenance Manual, Page: 190 / 369

Share
Download
Toshiba Portege R400 Series Maintenance Manual Download Page 190

3  Tests and Diagnostics  

 

3.28  3D Test Program 

This section describes how to perform the 3D test with the test program. 

1. Load the Novel EV620  3G (EVD0) test disc into the external optical disc drive and turn 

off the computer's power. 

2. While holding down F12 key on the keyboard, turn on your computer. When the In Touch 

with Tomorrow TOSHIBA logo screen appears, release the F12 key. 

3. Use the left and right cursor keys to select the optical disc drive icon from the menu. 

The following message will appear: 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bootable CD Hauptmenue / Bootable CD main menue  [x] 
 A = Free Fdisk / Free Format                                  
 B = XFdisk, diskcopy, diskcomp, old fdisk                     
 C = Low-Level-Format Tools                                    
 D = Partition Resizer                                         
 E = lange Dateinamen  / long file names support Ver.0.40a     
 F = DOS-Navigator Ver. 4.90 (NC-Clone) EXIT = ALT-X           
 G = Volkov Commander Ver. 4.99.08 (NC-Clone)                  
 H = File Maven Ver. 3.5 verbindet/connects PCs                
 J = Aida 16 Ver. 2.12                                         
 K = Save Partition Ver. 2.91                                  
 L = BIOS-Motherboardherst./ manufacturer of motherboard       
 M = Novatel Wireless OEM Tester                               
 N = Editor, Kalender, Rechner/ editors, calendar, calculator ] 
 O = DiskImage Ver. 1.4                                        
 P =                                                           
 Q = Spiele I / games I                                        
 R = Spiele II / games II                                      
 S = F-Prot Virensucher April 2005 / virus checker April 2005  
 T = Active@ Ntfsreader (read only) Ver. 1.02                  
 U = Lookdisk Ver. 1.83 (sucht nach Dateien / looks for files)] 
 V = Picture Viewer Ver. 1.94                                  
 W = Hilfe / help                                              
                        [ Ende / Exit ]    
 

3-78 

[CONFIDENTIAL] 

PORTEGE R400 Maintenance Manual (960-623) 

Summary of Contents for Portege R400 Series


















































































































































































































































































































































































Reviews:

No comments