manualshive.com logo in svg

Toshiba Portege R400 Series, Maintenance Manual, Page: 177 / 369

Share
Download
Toshiba Portege R400 Series Maintenance Manual Download Page 177

3  Tests and Diagnostics  

Subtest02 (GbE) 

This subtest checks the operation of mini-PCI I/F by the loopback test in the 
chip. Select 

2

 to execute and press 

Enter

.  

The following message will appear: 

 

Testing adaptor...hit <ESC> to abort.  

*

 

External Loopback Test...PASSED 

Testing completed. 

*

 

*

 

Loopback Test Complete 

*

 

*

 

*

 

1000Base Auto-negotiation TxRx Test

 

*

 

*  CE Test Complete 

 

NOTE

:  The menu displayed by your computer may be slightly different from the one 

shown above. 

    If 

a 

defective 

is 

found, 

NG

 

message will appear in the display. 

Subtest03 (Marvel) 

NOTE

:  This Subtest is not supported in this computer. 

 

PORTEGE R400 Maintenance Manual (960-623) 

[CONFIDENTIAL] 

3-65 

Summary of Contents for Portege R400 Series


















































































































































































































































































































































































Reviews:

No comments