manualshive.com logo in svg

Toshiba Portege R400 Series, Maintenance Manual, Page: 195 / 369

Share
Download
Toshiba Portege R400 Series Maintenance Manual Download Page 195

 

3  Tests and Diagnostics 

PORTEGE R400 Maintenance Manual (960-623) 

[CONFIDENTIAL] 

3-83 

3.29.3  CD Sound (Standard) test 

To execute the CD Sound (Standard) test, press 

3

 and 

Enter

. Insert the test media 

(TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the 
test media can not be prepared). Following menu appears in the display. 

For details on use of test media, refer to 3.29.3.1 Test media (Toshiba-made test media). 
For details on use of audio CD on the market, refer to 3.29.3.2 Audio CD. 

 

3.29.3.1  Test media (Toshiba-made test media) 

CD/DVD TEST  IN PROGRESS XXXXXXXX 

xxxxxxx DIAGNOSTIC TEST VX.XX 

[Ctrl]+[Break] : test end 

[Ctrl]+[C]     :  key stop 

     SUB-TEST   : XX 

PASS COUNT : XXXXX    ERROR COUNT: XXXXX 

WRITE DATA : XX       READ DATA  : XX 

ADDRESS    : XXXXXX    STATUS     : XXX 
 
01 – Japanese Narration 

02 – English Narration 

03 – Test Tone A (100Hz – 20Hz) 

04 - Test Tone B (400Hz – 3KHz L-R) 
 
 

 

        Drive 

# 

= 

0, 

ATAPI 

status 

=00 

                             Command = XX 

                            [[Block address = XXXXXXXX]] 

                            [[Block length  = XXXXXXXX]] 
                            Final : Block address = XXXXXXXXX 

 

Subtest 01 

Japanese Narration 

 

Selected this subtest, narration in Japanese starts and following message 
appears in the display. 

 

Play start CD sound ! 

Press any key <Play stop>.

   

 

Press any key and stop the narration. Then return to the CD Sound (Standard) 
test menu. 

 

Summary of Contents for Portege R400 Series


















































































































































































































































































































































































Reviews:

No comments