manualshive.com logo in svg

Toshiba Portege R400 Series, Maintenance Manual, Page: 17 / 369

Share
Download
Toshiba Portege R400 Series Maintenance Manual Download Page 17

 

 1  Hardware Overview 

PORTEGE R400 Maintenance Manual (960-623)

 

[CONFIDENTIAL]

 

1-3

 

‰

 

PC card slot 

A PC card slot is provided. The PC card slot (PCMCIA) accommodates one Type II card. 

‰

 

Fingerprint sensor 

The computer is equipped with a fingerprint sensor and fingerprint authentication utility. 
They enable only person who has registered his/her fingerprint to use the computer. 

‰

 

Sound system 

The sound system is equipped with the following features: 

•

 

•

 

•

 

•

 

•

 

speakers 

Volume control 

Stereo headphone jack 

External microphone jack 

Built-in microphone  

‰

 

Internal LAN 

The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-
T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet 
LAN (1000 megabits per second, 1000BASE-T).  

‰

 

Bluetooth  

The computer is equipped with Bluetooth (V2.0+EDR) communications standard enable 
wireless connection between electronic devices such as computers and printers. It 
supports wireless communication switch. 

‰

 

Wireless LAN  

The computer is equipped with PCI Express Mini Card type wireless LAN card that 
supports 802.11 a/b/g in the PCI Express Mini Card slot. This function can be switched 
on and off by a switch on the computer. 

‰

 

UWB  

The computer is equipped with PCI Express Mini Card type UWB card  

Summary of Contents for Portege R400 Series


















































































































































































































































































































































































Reviews:

No comments