Toshiba Portege A 100 User Manual Download Page 104

Page: 104 / 181

HW Setup and Passwords

Portégé A100

7-8

Portégé A100

Version

Last Saved on 25.11.2003 16:22

ENGLISH using Palau30 Online.dot –– Printed on 28.11.2003 as

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.

Enabled

Enables Wake-up on LAN.

Disabled

Disables Wake-up on LAN. (Default)

Do not install or remove an optional memory module while Wake-up on
LAN is enabled.

Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.

Built-in LAN

Enabled

Enables built-in LAN functions. (Default)

Disabled

Disables built-in LAN functions.

Button Setting

Power Button Lamp

This drop-down menu enables you to specify how the Power button lamp
glows depending on the status of your computer.

[Off]

Always off

[Mode 1]

Sets Mode1 Glows blue (Power on), Glows
yellow (Standby), Glows orange (Power
off/Hibernation). (Default)

[Mode 2]

Sets Mode2 Glows blue (Power on), Alternately
flashes green and orange (Standby), Alternately
flashes green and blue (Power off/Hibernation).

[Mode 3]

Sets Mode3 Changes in order of green, orange
and blue (Power on), Glows yellow (Standby),
Glows orange (Power off/Hibernation).

That when you remove both the AC adaptor and the Battery pack, Mode
1 (default) is automatically selected. However, the setting will return to the
mode you has selected when you power your computer on.

Summary of Contents for Portege A 100






















































































































































































Search results

Summary of Contents for Portege A 100

Reviews:

Related manuals for Portege A 100

Brands by name

Popular brands

Toshiba Portege A 100, User Manual

Search results

Summary of Contents for Portege A 100

Reviews:

Related manuals for Portege A 100

Brands by name

Popular brands