Getting Started
Portégé A100
3-9
Portégé A100
Version
2
Last Saved on 25.11.2003 16:17
ENGLISH using Palau30 Online.dot –– Printed on 28.11.2003 as
For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power
Saver. Otherwise, the computer will shut down in Standby mode. If
battery power becomes depleted, data saved in Standby will be lost.
■
You can return to your previous working environment immediately
when you turn on the computer.
■
Saves power by shutting down the system when the computer
receives no input or hardware access for the duration set by the
System hibernate feature.
■
You can use the panel power off feature.
Starting Hibernation
You can also enable Hibernation by pressing Fn + F4. See Chapter 5,
The Keyboard, for details.
To enter Hibernation mode, follow the steps below.
1. Click
start
.
2. Select
Turn Off Computer
.
3. Open the
Turn Off Computer
dialog box.
Hibernate
is not
displayed.
4. Press the
Shift
key. The
Standby
item will change to
Hibernate
.
5. Select
Hibernate
.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press
the power button or close the lid. First, however, make the appropriate
settings according to the steps below.
1. Open the
Control Panel
.
2. Open
Performance and Maintenance
and open
Power Options
.
3. Select the
Hibernate
window in the
Power Options
Properties
, select the
Enable hibernation
check box and click
the
Apply
button.
4. Open
TOSHIBA Power Saver
.
5. Select the
Setup Action
window.
6. Enable the desired Hibernation settings for
When I press the power
button
and
When I close the lid
.
7. Click the
OK
button.
