The Keyboard
Portégé A100
5-4
Portégé A100
Version
2
Last Saved on 25.11.2003 16:19
ENGLISH using Palau30 Online.dot –– Printed on 28.11.2003 as
Power save mode:
Pressing
Fn
+
F2
changes the power save mode.
If you press
Fn
+
F2
, the Power Save Mode is displayed in a dialog box.
Continue holding down
Fn
and press
F2
again to change the setting. You
can also change this setting through the
Profile
item in TOSHIBA Power
Saver.
Standby:
When you press
Fn
+
F3
, the computer can enter Standby.
To avoid entering Standby unexpectedly, a dialog box appears for
verification. However, if you check the checkbox in the dialog box, it will
not appear from the next time.
Hibernation:
When you press
Fn
+
F4
, the computer can enter
Hibernation. To avoid entering Hibernation unexpectedly, a dialog box
appears for verification. However, if you check the checkbox in the dialog
box, it will not appear from the next time.
Display selection:
Press
Fn
+
F5
to change the active display device.
When you press these hot keys a dialog box appears. Only selectable
devices will be displayed. Hold down
Fn
and press
F5
again to change
the device. When you release
Fn
and
F5
, the selected device will change.
If you hold down the keys for three seconds the selection will return to
LCD
.
LCD Display Brightness:
Pressing
Fn
+
F6
decreases the display
brightness in decrements. When you press these hot keys, the current
setting will be displayed for two seconds by an icon. You can also change
this setting through the
Screen brightness
item of the
Basic Setup
tab in
TOSHIBA Power Saver.
