Toshiba GD-1200 Operator'S Manual Download

Page: 98 / 186

5.ADVANCED FUNCTIONS

4.Mailbox Communication (Cont.)

Press the [CONFIDENTIAL] (or [BULLETIN BD.]) button, and then
press the [INPUT] button.

Press the [ENTER] button.

• If the selected mailbox has not been set, "No entry" appears.

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-

imum 20 digits) and then press the [ENTER] button.

Press the [ENTER] button.

• If the box number keyed in is not correct, "No entry" appears. If the password keyed in is not correct, "Invalid

number" appears. Key in the correct box number or password.

Press the [START] button.

• The data of the original is registered in the mailbox as it is input in a memory.
• When you cancel the registration, press the [STOP] button and then press the [JOB CANCEL] button.

Summary of Contents for GD-1200



























































































































































































Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands

Toshiba GD-1200, Operator'S Manual

Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands