Toshiba GD-1200 Operator'S Manual Download

Page: 92 / 186

5.ADVANCED FUNCTIONS

4.Mailbox Communication (Cont.)

Press the [BOX NUMBER] button to enter the next menu, key in the
box number(s) (maximum 20 digits), and then press the [ENTER] but-
ton.

• If a password has been set, press the [PASSWORD] button to enter the next menu, key in the password (max-

imum 20 digits) and then press the [ENTER] button.
* You can delete the mailbox with the administrator password. Ask the administrator about the administrator

password.

Press the [ENTER] button.

Press the [YES] button.

• In case of deleting a confidential mailbox or a bulletin board mailbox, "Not allowed now" appears if the [YES]

button is pressed while some data are still in these mailboxes.

• If the box number keyed in is not correct, "No entry" appears. If the password keyed in is not correct, "Invalid

number" appears. Key in the correct box number or password.

Summary of Contents for GD-1200



























































































































































































Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands

Toshiba GD-1200, Operator'S Manual

Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands