Toshiba GD-1200 Operator'S Manual Download

Page: 80 / 186

5.ADVANCED FUNCTIONS

2. Priority Transmission

Priority Transmission allows you to perform a transmission prior to other reserved transmissions (including
redial standby).
•

For this function, only a direct dialing method (with digital keys) and an address book entry method are
available.

•

Only one remote Fax can be specified per one transmission in this function.

Place the original(s).

•

P.24 “Setting originals”

Press the [FAX] button on the control panel.

Press the [OPTION] button and set the transmission conditions.

•

P.27 “4.Setting the Transmission Conditions”

Press the [ADVANCED] button to enter the advanced menu, and then
press the [PRIORITY RESERVE] button.

Press the [ENTER] button.

Specify the remote Fax

• Entering the Fax number (

P.35 “Direct entry with digital keys”)

• Selecting from address book (

P.36 “Address book entry”)

Press the [START] button.

Summary of Contents for GD-1200



























































































































































































Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands

Toshiba GD-1200, Operator'S Manual

Search results

Summary of Contents for GD-1200

Reviews:

Related manuals for GD-1200

Brands by name

Popular brands