Toshiba e-STUDIO 550, Service Manual

Page: 266 / 346

JUNE 2002 © TOSHIBA TEC 16 - 29 e-STUDIO550/650/810 RADF
The large original exit motor starts to slow down when the trailing edge of the original has proceeded a
specified distance after passing the 4th roller. After the large original exit sensor has detected the
trailing edge of the original, the read motor stops rotating soon and the large original exit motor stops
rotating when the original has proceeded a specified distance. The original is nipped by the large
original exit roller.
(5) Start of back side registering
Same operation as 16.5.2.(6)
(6) Start of back side feeding
Both the large original exit and read motors start to rotate forward. After the leading edge of the
original has reached the read sensor and been transported a specified distance by the read motor, the
disengagement solenoid turns ON. Then the large original exit motor stops rotating.
The large original exit motor starts to rotate in reverse after the original has been transported to the
large original exit and the leading edge of the original has reached the 3rd roller.
The large original exit motor starts to slow down when the trailing edge of the original has proceeded a
specified distance after passing the 4th roller. After the large original exit sensor has detected the
trailing edge of the original, the read motor stops rotating soon and the large original exit motor stops
rotating when the original has proceeded a specified distance. The original is nipped by the large
original exit roller.