Toshiba e-STUDIO 550, Service Manual

Page: 247 / 346

e-STUDIO550/650/810 RADF 16 - 10 JUNE 2002 © TOSHIBA TEC
The SCN-SCR turns OFF when the leading edge of the original has reached the scanning section.
When the trailing edge of the original has proceeded a specified distance after passing the 3rd roller,
the large original exit motor starts to accelerate.
(7) After the original trailing edge has passed the 3rd roller
When the leading edge of the original has come to a specified distance before the small original exit
roller, the small original exit motor starts to rotate forward.
When the intermediate transport sensor detects the trailing edge of 1st original, the large original exit
motor stops rotating unless the leading edge of 2nd original has come to a given place. If it has, the
large original exit motor slows down to the speed of scanning.
When the trailing edge of the original has come to a specified distance before the small original exit
roller, the small original exit motor starts to slow down.