manualshive.com logo in svg

Toshiba e-STUDIO 550, Service Manual

Share
Download
Toshiba e-STUDIO 550 Service Manual Download Page 117

e-STUDIO550/650/810  LASER OPTICAL UNIT

8 - 4

JUNE 2002 ©  TOSHIBA TEC

(2) Polygonal motor unit

This unit consists of the polygonal motor, polygonal

mirror and polygonal mirror cover.

a. Polygonal motor

This motor rotates the polygonal mirror in high

speed.

The DC motor controls the rotation speed of the

mirror motor as follows:

During standby

:10,000.000 rpm (approx.)

During copying

:37,216.337 rpm (approx.)

b.

Polygonal mirror

Laser beams emitted from the laser diode are

reflected by this mirror. As the polygonal mirror

is rotated by the polygonal motor, the reflected

laser light moves in sync with the rotation. The

direction of the movement is the primary

scanning direction of the image. Two scan is

performed on one plane of the polygonal mirror.

As the polygonal mirror has eight planes, sixteen

scans are performed in one rotation of the

polygonal mirror.

c. Polygonal mirror cover

Polygonal mirror cover reduces the windage loss

and noise, prevents adhesion of foreign objects

onto the mirror surface and releases heat.

2 scan is completed by completion of steps (A) to (C). 2
scan is performed on one plane of the polygonal mirror.
16 scans can be made with one rotation of the polygonal
mirror.

Fig. 8.2-1

Laser light

Drum

Laser light

Drum

Laser light

Drum

(C)

(B)

(A)

Summary of Contents for e-STUDIO 550



























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands