Toshiba Density (Consistency) Meter LQ500, Operation Manual

Page: 43 / 113


41

6 F 8 A 0 5 2 1
5.2.8 Measured values display and operating procedures
5.2.9 Self-diagnosis data display operating procedures
MEASURED VALUES *
p PHASE:
123.56 N=0
T TEMP: 30.00
°
C
X DENSITY: 2.34 %TS
Move the cursor to "2" with [
→
] key, and press [SET] key to
select [ 2:MEASURED VALUES]
1
：
READ PARAMETERS
2
：
MEASURED VALUES
3
：
SELF-DIAGNOSIS
It is possible to verify the measured phase value (and
the angle rotation N), the measured fluid temperature
value, as well as the density calculated based on them.
[*] in the upper right corner will blink synchronously with
the data updating thus making it possible to verify that
the data updating is definitely taking place.
[ESC]
(Previous
Menu)
[ESC]
(Previous
Menu)
[ESC]
(Previous
Menu)
SL:MICROWAVE SIG.LVL
DATA :
−
53 dBm
[ESC] RETURN
Move the cursor to "3" with [
→
] key,
and press [SET] key to select [3:SELF-DIAGNOSIS]
ST:STATUS :GOOD
[ESC] RETURN
Whether the phase m easurement operation is
normally functioning or not can be verified.
The micro wave receive signal level can be
verified. Normally, the level is -45 to -75. (dBm)
1 ：READ PARAMETERS
2 ：MEASURED VALUES
3 ：SELF-DIAGNOSIS
[DN]
(Pre. menu)
[UP]
(Next menu)
[UP]
(Next menu)