Toshiba Density (Consistency) Meter LQ500, Operation Manual

Page: 18 / 113


16

6 F 8 A 0 5 2 1
3. INSTALLATION
3.1 Precautions for Installation
WARNING
DO
■
The meter is heavy. To move
the meter for relocation or
installation, a qualified operator
must handle it by using
equipment such as a truck, a
crane or a sling.
In addition, when you lift the meter
with its lifting bolts, make sure the
bolts have been securely
tightened to the end.
Overturning or dropping can cause
injuries or equipment failure.
DON’T
■
Do not operate where there is
a possibility of leakage of
flammable or explosive gas.
A fire or explosion can occur.
CAUTION
DON’T
■
Avoid installing the meter in
any of the following places:
Otherwise, a fire or equipment
breakdown or failure can occur.
l
Dusty place
l
Place where corrosive gases
(SO
2
, H
2
S) or flammable gases
may be generated.
l
Place exposed to vibration or
shock that exceeds permissible
level.
l
Place exposed to condensation
due to abrupt change in
temperature.
l
Place too cold or hot for
installation
l
Place too humid for installation
l
Near an apparatus that generates
strong radio waves or strong
magnetic field.
DO
Install the meter in a place
easier for operation,
maintenance and inspection.
In addition, when you place the
meter temporarily in a stocking
area, make sure to execute fall
prevention measures.
Stumbling over the meter or a fall
of the meter can cause injury.
RF section
Detector
Applicator
Cure sheet
Roll-over
prevention
stopper