English
-
45
S
ystem Setup
44
-
English
S
ystem Setup
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
6
Press the
¥
buttons until the picture is dis-
played according to your preferences.
• If you do not press a button within ten seconds,
the IPC menu disappears automatically.
7
On completion, press RETURN button to exit the
menu.
8
Select “IPC”
Using the
buttons, move the selection bar
to “IPC” then press
or OK button to select the
IPC option.
• When intelligent picture control mode is ON, the
sharpness of the image is adjusted automatically.
5
Off
Off
On
Programme
Select “VCR”
Move the selection bar to “VCR”, then press
or OK button.
4
VCR
Front Display
: Automatic
: On
: RGB
NICAM
AV1 Output
Programme
Intelligent Picture
Control (IPC)
The intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically, accord-
ing to your own preferences.
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
Select “Setup”
Using the
buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “System”
Using the
buttons, move the selection bar
to “System” then press
or OK button to select.
3
Programme
You also can directly select this function using
IPC button on the remote control.
Note
Select “Colour System”
Using the
buttons, move the selection bar
to “Colour System” then press
or OK button to
select Colour System option.
Automatic -> PAL -> B/W.
• Automatic : When playing back a tape, the sys-
tem standard is automatically
selected by the DVD Recorder-
VCR.
• B/W :
Black and White.
5
Select “VCR”
Move the selection bar to “VCR”, then press
or OK button.
4
VCR
Front Display
: Automatic
: On
: RGB
NICAM
AV1 Output
Programme
Selection the Colour
Mode
Before recording or playing back a tape, you can select
the required system standard. Otherwise, the system
automatically selects the reception standard when you
select Automatic.
• When playing back a tape, the standard is automatical-
ly selected by the DVD Recorder-VCR.
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
Select “Setup”
Using the
buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “System”
Using the
buttons, move the selection bar
to “System” then press
or OK button to select.
3
On completion, press RETURN three times to
exit the menu.
6
Programme
Programme
