Toshiba D-VR18DTKB Owner'S Manual Download Page 79

Page: 79 / 96

troducti

Connecti

Bas

ic Setup

layback

Ed
iti

CR Fu

ncti

on
s

ers

Fu
nc
ti

on
Set

Recordi

Set to “ON” to make the dynamic range narrower.

Select a setting using [

], then

press [ENTER / OK].

Your setting is activated.
“Dynamic Range Control” function is effective
only with analogue audio connection.

Note

• “Dynamic Range Control” function is available only

on discs recorded in the Dolby Digital format.

Select a setting using [

], then

press [ENTER / OK].

Your setting is activated.

48kHz: If your amplifier / decoder is NOT compatible

with 96 kHz PCM, select “48kHz”. Sound
recorded at 96 kHz is down sampled to
48 kHz.

96kHz: If your amplifier / decoder is compatible with

96 kHz PCM, select “96kHz”. Sound is
sampled at 96 kHz.

Note

When playing back a disc with copyright protection:
• Even if you select “96kHz”, the sound is down

sampled to 48 kHz.

Select a setting using [

], then

press [ENTER / OK].

Your setting is activated.

PCM:

Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to “PCM”.

Stream: Outputs Dolby Digital signals.

If your amplifier / decoder is compatible with
Dolby Digital, set to “Stream”.

Hint

When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital

format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.

Select a setting using [

], then

press [ENTER / OK].

Your setting is activated.

PCM:

Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to “PCM”.

Stream: Outputs MPEG Audio signals.

If your amplifier / decoder is compatible with
MPEG, set to “Stream”.

Select a setting using [

], then

press [ENTER / OK].

Your setting is activated.

ON: Outputs DTS signals.

If your amplifier / decoder is compatible with
DTS, set to “ON”.

OFF: No DTS signal is output.

If your amplifier / decoder is NOT compatible
with DTS, set to “OFF”.

3. Disc Menu Language (Default: English)

(DVD only)

Set “Disc Menu language”.

Select a language using [

then press [ENTER / OK].

Your setting is activated.

4. Audio Language (Default: Original)

(DVD only)

Set “Audio language”.

Select a language using [

then press [ENTER / OK].

Your setting is activated.
If “Original” is selected, the audio language is the
default of the inserted disc.

Dynamic Range Control (Default: ON) (DVD only)

PCM sampling (Default: 48kHz)

Dolby Digital conversion (Default: Stream)

Dynamic Range Control

ON
OFF

PCM

48kHz
96kHz

Dolby Digital

PCM
Stream

Settings for MPEG (Default: PCM) (DVD only)

Settings for DTS (Default: ON) (DVD only)

MPEG

PCM
Stream

DTS

ON
OFF

Disc Menu Language

English
Other

Audio Language

Original
English
Other

E9NG1BD_EN.book Page 79 Monday, April 7, 2008 5:54 PM

Summary of Contents for D-VR18DTKB

































































































Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands

Toshiba D-VR18DTKB, Owner'S Manual

Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands