Toshiba D-VR18DTKB Owner'S Manual Download Page 26

Page: 26 / 96

Manual Tuning (DVB)

You can preset a DVB channel manually and
individually.

Follow steps 1 to 3 in “Auto Tuning
(DVB)” on page 25.

Select “Manual Tuning” using
[

], then press [ENTER / OK].

Select your desired position number
using [

], then press

[ENTER / OK].

• The tuner will begin to search up or down

automatically. When a DVB channel is found,
the unit will stop searching.

• When “Auto” is selected the unit will search for

the channels which have not been stored in
channels memory.

Press [SETUP] to activate the
setting.

Select a Channel

You can select a channel using

[the Number buttons]

e.g.) 6 ch: Press

[6]

, then wait for 2 seconds or

press

[0]

[6]

15 ch: Press

[1]

[5]

, then wait for 2 seconds or

press

[0]

[1]

[5]

You can also select a channel using

[PROG.

/ ]

• You can only select channels 1 to 999.
• Analogue channels will be stored in channel 901-

999 and DVB channels will be stored in channel 1-
900 after it is scanned by this unit.

To switch DVB, analogue and external input (AV1/
AV2/AV3/DV(AV4)) mode.

You can switch between DVB, analogue and external
input (AV1/AV2/AV3/DV(AV4)) mode by pressing

[INPUT SELECT

]

repeatedly. The mode changes

as follows:

• You can also switch the mode by using

[PROG.

/ ]

• You can select any DVB channels using

[the Number buttons]

when you are in analogue or

external input (AV1/AV2/AV3/DV(AV4)) mode.

• You can select any analogue channels using

[the Number buttons]

when you are in DVB mode.

Quick Select

With “Quick select” menu, you can select your
favourite DVB channel quickly. Refer to “Edit Group
Lists” on page 27.

Press [ENTER / OK] while watching a
DVB channel.

• “Quick select” menu will appear.

Press [

] to select your favourite

group list. (“All”, “Group1” -
“Group8”)

• “All” shows a list of all the memorised DVB

channels.

• If the favourite group does not have any

channels, the group will be skipped.

Select the DVB channel you want to
watch using [

], then press

[ENTER / OK].

Press [RETURN / BACK] to exit.

DVB

Manual Tuning (DVB)

Channel

Auto

DVB mode

Analogue mode

AV1

AV2

AV3

DV(AV4)

DVB

S. No. Channel name

Moving picture 576i

ITV1

ITV2

ITV3

Channel

More 4

Quick select

All

E9NG1BD_EN.book Page 26 Monday, April 7, 2008 5:54 PM

Summary of Contents for D-VR18DTKB

































































































Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands

Toshiba D-VR18DTKB, Owner'S Manual

Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands