Toshiba D-VR18DTKB Owner'S Manual Download Page 86

Page: 86 / 96

Accidental erasure prevention

To prevent accidental recording on a recorded
cassette, remove its record tab. To record on it later,
cover the hole with cellophane tape.

One-touch Timer Recording

This feature allows you to set the recording length
simply by pressing

[REC

]

Turn on the unit and insert a
recordable tape.

Make sure that the TV input is set on the unit.

Press [VCR].

Select the recording mode using
[REC MODE]. (See page 85.)

Select the desired channel to record
using [PROG.

] or

[the Number buttons].

Press [REC

] repeatedly until the

desired recording time (30 minutes
to 8 hours) appears on the TV
screen.

One-touch Timer Recording will start.

• When the unit reaches the specified time, it will be

turned off automatically.

• To change the recording length during One-touch

Timer Recording, press

[REC

]

repeatedly until the

desired length appears.

• To cancel One-touch Timer Recording within the

specified time, press

[STOP

]

Hint

• The remaining recording time will appear on the TV

screen during One-touch Timer Recording. Press

[DISPLAY]

to see it on the TV screen.

Note

• If VCR One-touch Timer Recording is completed

during DVD playback or recording, the VCR will be
in stop mode and the DVD keeps the current mode.

• You cannot use the pause function during One-

touch Timer Recording.

• When One-touch Timer Recording is finished and

the power is turned off, the unit will switch to the
timer-standby mode automatically if a timer
recording has been programmed. Press

[TIMER SET]

to cancel the timer-standby mode in

order to use the unit continuously.

DVC to VCR Dubbing

This function helps you to copy the contents in the
DVC (digital video camcorder) to VCR.

Preparing for DV dubbing (DVC to VCR):

• Insert a recordable videotape.
• Make sure your DVC is in video mode.

Press [VCR].

Select “DV” channel using
[INPUT SELECT

] or

[PROG.

Select the recording mode using
[REC MODE].(See page 85.)

Stop or pause the DVC where you
want to start dubbing.

Play back the DVC

Press [REC

The dubbing will start.

Note

• Dubbing will start from where the tape is stopped.

Record tab

VCR

0:30

8:00

7:30

1:00

Normal Recording

VCR

E9NG1BD_EN.book Page 86 Monday, April 7, 2008 5:54 PM

Summary of Contents for D-VR18DTKB

































































































Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands

Toshiba D-VR18DTKB, Owner'S Manual

Search results

Summary of Contents for D-VR18DTKB

Reviews:

Related manuals for D-VR18DTKB

Brands by name

Popular brands